||Jai Sri Gurudev ||

Sri Adichunchanagiri Shikshana Trust(R.)

S J C INSTITUTE OF TECHNOLOGY

An Autonomous Institution under VTU from 2024-25
AICTE Approved, Accredited by NBA(CSE,ISE,ECE,ME,CV,AE) NAAC with A+ grade, QS I-Gauge Gold rated P.B. No. 20, B.B. Road,
Chickballapur- 562101, Karnataka.

||Jai Sri Gurudev ||

Adichunchanagiri Shikshana Trust(R.)

S J C INSTITUTE OF TECHNOLOGY

An Autonomous Institution under VTU from 2024-25
AICTE Approved, Accredited by NBA(CSE,ISE,ECE,ME,CV) NAAC with A+ grade, QS I-Gauge Gold rated P.B. No. 20, B.B. Road,
Chickballapur- 562101, Karnataka.

||Jai Sri Gurudev ||

BGSKH Education Trust[R.]

Balagangadharanatha Swamiji Kengal Hanumanthaiah Education Trust

An Autonomous Institution under VTU from 2024-25
AICTE Approved, Accredited by NBA(CSE,ISE,ECE,ME,CV,AE) NAAC with A+ grade, QS I-Gauge Gold rated P.B. No. 20, B.B. Road,
Chickballapur- 562101, Karnataka.

Publications

Academic Year 2025-26
[Scopus Indexed Journals]

Publications 2025-26

Sl. No	Name of The Faculty	Description / Title of The Paper	Name of Journal	ISBN/ISSN / DOI	Year of Publication
1	Dr. Rukmangadha P	Optimized Al2011 hybrid composites reinforced with nano TiC and MoS₂ for enhanced mechanical and tribological performance	Research on Engineering Structures and Materials	http://dx.doi.org/10.17515/resm20261071me0811rs	2026
2	Nagesh Kumar R	Thermodynamic investigation on the use of transcritical carbon dioxide in a reheat gas turbine-based combined cooling and power cycle	International Journal of Air-Conditioning and Refrigeration (Springer)	https://doi.org/10.1007/s44189-026-00097-3	2026
3	Nagesh Kumar R	Analyzing the effect of n-TiB2 on hardness, corrosion behavior, and statistical study of machining parameters on Al7075 nano composite	The Canadian Journal of Metallurgy and Materials Science	https://doi.org/10.1080/00084433.2025.2580820	2026
4	Dr. Manjunath K N	Influence of Fibre Ratio and Chemical Treatment on the Properties of Hybrid Epoxy Composites Reinforced with Areca and Banana Fibre	Journal of the Indian Academy of Wood Science	https://link.springer.com/article/10.1007/s13196-025-00376-3	2025

Academic Year 2024-25
[Scopus Indexed Journals]

Publications 2024-25

Sl. No	Name of The Faculty	Description / Title of The Paper	Name of Journal	ISBN/ISSN / DOI	Year of Publication
1	N Praveen	Effect of CNC Turning Parameters on MRR, Cutting Force and Surface Roughness for Ternary Shape Memory Alloys (SMAs)	Elsevier	https://doi.org/10.1016/j.rineng.2025.104876	2025
2	Thyagaraj N R	Pressure Distribution Analysis of Leaded Tin Bronze Hydrodynamic Journal Bearing under Different Lubrication Conditions	Journal of Bio- and Tribo-Corrosion	https://doi.org/10.1007/s40735-025-00956-3	2025
3	Palakshaiah	Thermo Hydraulic Performance of Double Pipe Heat Exchanger Affected by Triangular and Semicircular Protrusion Insert on Twisted Tape	CFD Letters	ISSN: 2180-1363	2025
4	K N Manjunath	Influence of Fiber Ratio and Chemical Treatment on the Properties of Hybrid Epoxy Composites Reinforced with Areca and Banana Fibre	Springer	https://doi.org/10.1007/s13196-025-00376-3	2025
5	Chandra Mohan H K	Comparative Study on Mechanical and Tribological Properties of Alkali-Treated and Untreated Sida acuta Fiber-Reinforced Composite	MDPI	https://doi.org/10.3390/eng.6070143	2025
6	Chandra Mohan H K	Influences of the Sintering Temperature on Microstructure and Mechanical Properties of Spark Plasma Sintered Al 4.5 wt.% Cu alloy Ball Milled Powder	Physics of Metals and Metallography	ISSN: 0031-918X, 1555-6190	2025
7	Thyagaraj N R	Microstructural Characterization and Wear Studies of T6 Heat-Treated A6082 Composite Reinforced with Yttria-Stabilized Zirconia	Journal of Advanced Manufacturing System	https://doi.org/10.1142/S0219686724500124 ISSN: 0219-6867	2024
8	Thyagaraj N R	Study on the Influence of Aluminium Nitride Particulates on the Dry Sliding Wear Behavior and Mechanical Properties of Aluminium 6061 Alloy Developed Using Stir Casting Method	Materials Technology Report	Vol. 2 No. 2 (2024) eISSN: 3029-2646	2024
9	Thyagaraj N R	Experimental Study on Thrust Force and Torque on Post-Drilling of Hybrid Glass/Kevlar FRP Laminates	Springer	https://link.springer.com/chapter/10.1007/978-981-97-3654-6_20	2024
10	Rukmangadha P	Development of Power Generation Unit Using Dual Renewable Energy Source	IJSR	https://doi.org/10.32628/IJSRMME24837	2024
11	G.V. Gnanedra Reddy	Ultrasonic Assisted Stir Squeeze Casting of AA5456/Al₂O₃–SiC–Gr–MoS₂ Hybrid Nanocomposites: Microstructure and Strengthening Analysis	Elsevier	https://doi.org/10.1016/j.jmrt.2024.12.172	2024

Academic Year 2023-24
[Scopus Indexed Journals]

Publications 2023

Sl. No	Name of The Faculty	Description / Title of The Paper	Name of Journal	ISBN/ISSN / DOI	Year
1	Dr. Mallaradhya H M	Enhancing Wear Resistance of UHMWPE Composites with Micro MoS₂ and Nano Graphite: A Taguchi-DOE Approach	ACS Omega	ACS Omega 2024, 9, 16743–16758	2023
2	Dr. Mallaradhya H M	Conceptual Design of Loiter Munition UAV	Tuijin Jishu/Journal of Propulsion Technology	https://www.propulsiontechjournal.com/index.php/journal/article/view/4330	2023
3	Dr. Mallaradhya H M	Aerodynamic Design, Analysis and Optimization of Transonic Axial Compressor Blade with the combination of NACA 65 Double Circular Arc (DCA) and Multiple Circular Arc Airfoil (MCA)	Tuijin Jishu/Journal of Propulsion Technology	https://www.propulsiontechjournal.com/index.php/journal/article/view/4328	2023
4	Dr. Chandramohan H K	Microstructural and Mechanical Property Evaluation of Al-10 MgSi Alloy Processed Through Additive Manufacturing Technique	Engineering Headway, Trans Tech Publications ltd, Switzerland	2813-8333, Vol. 1, pp 91-95	2023
5	Dr. Mallaradhya H M	Characterization of Al 5052 Based Metal Matrix Composites Reinforced with SiC and Al₂O₃	Tuijin Jishu/Journal of Propulsion Technology	https://www.propulsiontechjournal.com/index.php/journal/article/view/1914	2023
6	Dr. Thyagaraj N R & Dr. Mallaradhya H M	Thermal Analysis of Novel Pebble Absorber Based Solar Thermal Collector	Tuijin Jishu/Journal of Propulsion Technology	https://propulsiontechjournal.com/index.php/journal/article/view/1156	2023
7	Dr. Chandramohan H K	Densification, Microstructure and Mechanical Properties of Al-4.5 wt.% Cu Alloy Powder Sintered Through Spark Plasma Sintering Process	Springer (Metallography, Microstructure and Analysis)	Volume 12, pages 779–787, (2023)	2023
8	Dr. Thyagaraj N R & Dr. Mallaradhya H M	Assessment of Fire Resistance Characteristics and Theoretical Modeling and Numerical Investigation of Fiber Reinforced Green Composite	European Chemical Bulletin	https://doi.org/10.48047/ecb/2023.12.si5.110	2023
9	Dr. Thyagaraj N R & Dr. Mallaradhya H M	Experimental Investigation on Flexural Strength and Fracture Toughness of Hybrid Hemp and E-Glass Composites	European Chemical Bulletin	https://doi.org/10.48047/ecb/2023.12.si5.111	2023
10	Dr. Thyagaraj N R	Process Parameters Studies on Density and Hardness of AlSi7Mg Alloy Developed by DMLS Method	Engineering Headway, Trans Tech Publications ltd	2813-8333, pp 83-90	2023
11	Dr. Thyagaraj N R	Studies of Al2219-SiC Composite Using Liquid Metallurgy: Effect of Mechanical and Wear Properties	Engineering Headway, Trans Tech Publications ltd	2813-8333, pp 49-59	2023
12	Dr. Ranganatha R	Synthesis and wear characteristics of a copper-tin-lead alloy made via continuous casting	European Chemical Bulletin	Eur. Chem. Bull. 2023, 12(10), 5914-5924	2023
13	Suresh Gowda M V	Evaluation of Surface roughness and flank wear in drilling of jute flax polymer matrix composites	Scope	Vol 13, No 02, June 2023	2023
14	Adarsha Reddy B N	Comparative study of Al - 10 wt.% Zn alloy processed through As-cast and Centrifugal Casting.	TuijinJishu/Journal of Propulsion Technology	ISSN: 1001-4055 Vol.44 No.4	2023
15	Adarsha Reddy B N	Microstructure and Mechanical Properties of Hypo and Hypereutectic Al-Si Alloy Processed through Die and Centrifugal Casting	TuijinJishu/Journal of Propulsion Technology	ISSN: 1001-4055 Vol.44 No.4	2023

Academic Year 2022-23
[Scopus Indexed Journals]

Sl. No	Name of The Faculty	Description / Title of The Paper	Name of Journal	ISBN/ISSN / DOI	Year of Publication
1	Dr. Chandramohan H K	Comparative Study of Grain Size and Mechanical Properties of Die-Cast and Spray Formed Al-4.5 wt.% Cu Alloys Deposit	Metallography, Microstructure and Analysis (Springer)	https://doi.org/10.1007/s13632-022-00839-w	2022
2	Dr. Chandramohan H K	Mechanical and Tribological properties Correlations of Die Cast and Spray Formed Aluminum 2.5wt.% Cu-2.5wt% Mg-5wt% Zn Alloy	Solid State Phenomena, Trans Tech Publications Ltd Switzerland	ISSN: 1882-9779, Vol. 340, pp. 71–81	2022
3	Dr. Chandramohan H K	Aluminum 4.5wt.% Copper Alloy Powder Sintering Temperature Effect on Microstructure and Mechanical Properties of Spark Plasma Sintered Compact	Key Engineering Materials, Trans Tech Publications Ltd Switzerland	ISSN: 1662-9795, Vol. 937, pp. 47–54	2022
4	Dr. Manjunatha K N	DDevelopment and mechanical characterisation of Al-4.5%Cu alloy prepared using spark plasma sintered method	Advances in Materials and Processing Technologies	https://doi.org/10.1080/2374068X.2020.1801251	2022
5	Dr. Manjunatha K N	The Manufacture and Characterisation of Short Banana Fibre-Reinforced Polymer Composites	Advances in Materials and Processing Technologies	https://doi.org/10.1080/2374068X.2020.1833403	2022
6	Dr. Manjunatha K N	High speed machining of titanium Ti 6Al4V alloy components: study and optimization of cutting parameters using RSM	Advances in Materials and Processing Technologies	https://doi.org/10.1080/2374068X.2020.1806684	2022
7	Dr. Mallaradhya H M	Optimization of Parameters and Prediction of Response Values Using Regression and Ann Model in Resistance Spot Welding Of 17-4 Precipitation Hardened Stainless Steel	Journal of Advanced Manufacturing Systems	https://doi.org/10.1142/S0219686722500111	2022
8	S. Harish	Effect of Hot Rolling on Friction and Wear Characteristics of TiC Reinforced Copper-Based Metal Matrix Composites	Advances in Materials Science and Engineering	https://doi.org/10.1155/2023/8956234	2022
9	G. V. Gnanedra Reddy	Dry Sliding Wear behaviour of Organomodified nanoclay filled fiber reinforced polymeric nanocomposite using response surface methodology	International Conference on Recent Developments in Mechanical Engineering 2023	ICRDME 2023	2022
10	B. N. Adarsha Reddy	Mechanical, Microstructure and Tribological Properties of Al–20 wt% Zn Alloy Processed Through As Cast and Centrifugal Casting	Springer	https://doi.org/10.1007/s40033-024-00652-5	2022
11	Suresh Gowda M V	Analysis of Drilled Hole Quality and Circularity Error While Drilling Jute-Flax Hybrid Composites	International Journal of Innovative Research in Advanced Engineering (IJIRAE)	ISSN: 2349-2163, Vol. 9, Issue 9	2022

Academic Year 2022-21
[Scopus Indexed Journals]

Sl. No	Name of The Faculty	Description / Title of The Paper	Name of Journal	ISBN/ISSN / DOI	Year of Publication
1	Dr. Chandra Mohan H K	Conventional sintering of copper powder with and without addition of different weight percentage of aluminium powder	Journal of Mines, Metals & Fuels	ISSN: 0022-2755, Vol. 69, No.12A, pp. 8–13	April 2022
2	Dr. Mallaradhya H M	Study of Wear Characteristics of Ultra High Molecular Weight Polyethylene Nano Composite reinforced with Nano Al2O3	International Journal of Mechanical Engineering	https://doi.org/10.56452/0128	December 2021
3	Dr. Thyagaraj N R	Effect of surface treatment on tensile and buckling characteristic of natural fibre based hybrid composites	Materials Today Proceedings	https://doi.org/10.1016/j.matpr.2021.08.198	2022
4	Dr. Ranganatha R	Effect of Retrogression and re-aging on tensile mechanical properties in transverse direction of extruded rods from aluminium alloy AA 7049	Material Science and Heat Treatment	Vol. 62, No.1, pp. 40–46	June 2021
5	Dr. Chandra Mohan H K	Mechanical and Moisture Absorption Behaviour of Alkali Treated Sida Acuta Composite	Trans. Indian Institute of Metals (TIIM)	Vol. 24, Issue 8	August 2021
6	Dr. Chandra Mohan H K	Free Vibration and Moisture Absorption Behaviour of Sida Acuta Fibre Composite	Energy Material Research	10(1), pp. 1–11	March 2021
7	Dr. Chandra Mohan H K	Microstructural and Mechanical Characterization of Spark Plasma Sintered Al-4.5 wt% Cu Alloy	Journal of Materials Engineering and Performance	30(4), pp. 2433–2438	March 2021
8	Dr. Mallaradhya H M	Microstructure analysis of 17-4 precipitation hardened stainless steel at welded spots in resistance spot welding	Journal of advanced manufacturing systems world scientific publishing company.	https://doi.org/10.1142/S0219686721500189	2021
9	Dr. Chandra Mohan H K	Effect of Macro Alloying Element Addition of Aluminum on Pure Copper	Metallography, Microstructure and Analysis	10(1), pp. 36–45	January 2021
10	Dr. Ranganatha R	Influence of RRA Treatment on inter granular corrosion resistance and exfoliation corrosion resistance in AA7010 Aluminium alloy	ASTM Materials Performance & Characterization	ISSN: 2379-1365	January 2021

Year- 2023 [Scopus Indexed Journals]

Sl. No	Name of The Faculty	Description / Title of the Paper	Name of Journal	ISBN/ISSN/DOI	Date Of Publication
1	Dr. Mallaradhy H M	“Conceptual Design of Loiter Munition UAV”	Tuijin Jishu/Journal of Propulsion Technology	ISSN: 10014055, Vol. 44 No. 04 (2023)	2023
2	Dr. Mallaradhy H M	Aerodynamic Design, Analysis and Optimization of Transonic Axial Compressor Blade with the combination of NACA 65 Double Circular Arc (DCA) and Multiple Circular Arc Airfoil (MCA)	Tuijin Jishu/Journal of Propulsion Technology	ISSN: 10014055, Vol. 44 No. 04	2023
3	Dr. Chandramohan H K	“Microstructural and Mechanical Property Evaluation of Al-10 MgSi Alloy Processed Through Additive Manufacturing Technique”	Trans Tech Publications Ltd, Switzerland	ISSN: 2813-8333, Vol. 1. Pp 91-95, doi: 10.4028/p-iDw8lc	2023
4	Dr. Mallaradhy H M	Characterization of Al 5052 Based Metal Matrix Composites Reinforced with SiC and Al2o3	Tuijin Jishu/Journal of Propulsion Technology	ISSN: 10014055, Vol. 44 No. 04 (2023)	2023
5	Dr. Thyagaraj N R and Dr. Mallaradhy H M	Thermal Analysis of Novel Pebble Absorber Based Solar Thermal Collector	Link	https://doi.org/10.52783/tjjpt.v44.i2.1156	2023
6	Dr. Chandramohan H K	Densification, Microstructure and Mechanical Properties of Al-4.5 wt.% Cu Alloy Powder Sintered Through Spark Plasma Sintering Process	Metallography, Microstructure and Analysis	2023
7	Dr. Chandramohan H K	Preparation and Investigation on Compression strength wear behavior of Alkali treated and untreated Sidacuta reinforced composites for light weight structural application	Advances in Civil Engineering Materials	2023
8	Dr. Mallaradhy H M	Optimization Of Geometric Parameters For Impeller Design In An Axial Flow Pump	European Chemical Bulletin, Elsevier	ISBN: 20635346, DOI: 10.48047/ecb/2023.12.si5.112	2023
9	Dr. Thyagaraj N R and Dr. Mallaradhy H M	Assessment of Fire Resistance Characteristics and Theoretical Modeling and Numerical Investigation of Fiber Reinforced Green Composite	European Chemical Bulletin, Elsevier	DOI: 10.48047/ecb/2023.12.si5.110	2023
10	Dr. Thyagaraj N R and Dr. Mallaradhy H M	Experimental Investigation on Flexural Strength and Fracture Toughness of Hybrid Hemp and E-Glass Composites	European Chemical Bulletin, Elsevier	DOI: 10.48047/ecb/2023.12.si5.111	2023

Year- 2022 [Scopus Indexed Journals]

Scopus Indexed Journals – 2022

Sl. No	Name of The Faculty	Description / Title of the Paper	Name of Journal	ISBN/ISSN/DOI	Date Of Publication
1	Dr. H. K. Chandra Mohan	Aluminum 4.5 Wt. % Copper Alloy Powder Sintering Temperature Effect on Microstructure and Mechanical Properties of Spark Plasma Sintered Compact	Journal of Key Engineering Materials	ISSN: 1662-9795, DOI: 10.4028/p-0zq05z	2022
2	Dr. H. K. Chandra Mohan	Microstructure and Tribological Property Correlations of Die Cast and Spray Formed Al-30 wt.% Si Alloy	Journal of Mines, Metals & Fuels	ISSN: 0022-2755, DOI: 10.1007/s13632-022-00839-w	2022
3	Dr. H. K. Chandra Mohan	Comparative Study of Grain Size and Mechanical Properties of Die-cast and Spray Formed Al-4.5 wt. % Cu Alloys Deposit	Springer Metallography, Microstructure, and Analysis	DOI: 10.1007/s13632-022-00839-w	2022
4	Dr. H. K. Chandra Mohan	Mechanical and Tribological Properties Correlations of Die Cast and Spray Formed Aluminum 2.5wt.% Cu–2.5wt.% Mg – 5wt.% Zn Alloy	Journal of Solid State Phenomena	ISSN: 1662-9779, DOI: 10.4028/p-v47orq	2022
5	Dr. H. K. Chandra Mohan	Conventional sintering of copper powder with and without addition of different weight percentage of aluminium powder	Journal of Mines, Metals & Fuels	ISSN: 0022-2755, Vol.69, No.12A, pp 8-13	2022
6	Dr. Mallaradhy H M	Study on the tribological properties A356/Al203 and parametric optimization of wear behavior using taguchi and RSM	International Journal of Innovative Research in Advanced Engineering (IJIRAE)	ISSN: 2349-2163 ISSUE 01, Vol 9	2022
7	Dr. H. K. Chandra Mohan	Comparative Study of Grain Size and Mechanical Properties of Die-cast and Spray Formed Al-4.5 wt. % Cu Alloys Deposit	Metallography Microstructure and Analysis (Springer)	DOI: 10.1007/s13632-022-00839-w	2022

Year- 2021 [Scopus Indexed Journals]

Scopus Indexed Journals – 2021

Sl. No	Name of The Faculty	Description / Title of the Paper	Name of Journal	ISBN/ISSN/DOI	Date Of Publication
1	Dr. Ranganatha R	Influence of RRA Treatment on inter granular corrosion resistance and exfoliation resistance in AA7010 Aluminium alloy	ASTM Materials Performance and Characterization	ISSN: 2379-1365	27 Jan 2021
2	Dr. Chandramohan H K	Free Vibration and Moisture Absorption Behaviour of Sida Acuta Fibre Composite	Energy Material Research	10(1), pp 1-11	Jan 2021
3	Dr. Chandramohan H K	Microstructural and Mechanical Characterization of Spark plasma sintered Al-4.5 wt% Cu alloy powder	Journal of Materials Engineering and Performance	30(4), pp2433-2438	Jan 2021
4	Dr. Nagesh D	Optimization of Tribological Properties of Al6061, Boron and Graphite MMCs Using Taguchi Method	IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE)	ISSN(e) : 2278-1684, ISSN(p) : 2320–334X, PP : 55-72	2021
5	Dr. Chandramohan H K	Effect of Macroalloying Element Addition of Aluminum	Metallography Microstructure and Analysis	ISSN: 2379-1365	2021
6	Mallaradhya H M	Microstructure analysis of 17-4 precipitation hardened stainless steel at welded spots in resistance spot welding	Journal of Advanced Manufacturing Systems	DOI: 10.1142/S0219686721500189	2021
7	Dr. Chandramohan H K	Mechanical and Moisture Absorption Behaviour of Alkali Treated Sida Acuta Composite	Trans. Indian Institute of Metals (TIIM)	Vol 24, Issue 8	2021
8	Dr. Ranganatha R	Effect of Retrogression and re-aging on tensile mechanical properties in transverse direction of extruded rods from aluminium alloy AA 7049	Material Science and Heat Treatment	Volume 62, No.1 pp 40-46	2021
9	Mallaradhya H M	Optimization of parameters and predictions of response values using regression and ANN model in resistance spot welding of 17-4 precipitation hardened stainless steel	Journal of Advanced Manufacturing Systems	DOI: 10.1142/S0219686722500111	2021
10	Thyagaraj N R	Effect of surface treatment on tensile and buckling characteristic of natural fibre based hybrid composites	Materials Today Proceedings	DOI: 10.1016/j.matpr.2021.08.198	2021
11	Dr. Mallaradhya H M	Study of Wear Characteristics of Ultra High Molecular Weight Polyethylene Nano Composite reinforced with Nano Al2O3	International Journal of Mechanical Engineering	DOI: 10.56452/0128	2021
12	Dr. Chandramohan H K, et al.	Conventional sintering of copper powder with and without addition of different weight percentage of aluminium powder	Journal of Mines, Metals & Fuels	ISSN 0022-2755, Vol.69, No.12A, pp 8-13	2021

Year- 2020 [Scopus Indexed Journals]

Scopus Indexed Journals – 2020

Sl. No	Name of The Faculty	Description / Title of the Paper	Name of Journal	ISBN/ISSN/DOI	Date Of Publication
1	Madhusudhana S V, Manjunath K N	Development and Mechanical Characterization of Al4.5%Cu alloy prepared using spark plasma sintered method	Taylor and Francis Advances in Materials and Processing Technologies	DOI: 10.1080/2374068X.2020.1801251	23 July 2020
2	Ravikumar T R, G V Gnanendra Reddy, Madhusudhana S V, Manjunatha K N	Design of Wind blades for the development of lower power wind turbines using Betz and Schmitz methods	Taylor and Francis Advances in Materials and Processing Technologies	DOI: 10.1080/2374068X.2020.1833605	23 Oct 2020
3	Madhusudhana S V, Manjunatha K N, Veeresh Chandra M S	Dry sliding wear performance and morphology study of spray deposited Al -10 Wt%. %Cu alloys	Taylor and Francis Advances in Materials and Processing Technologies	DOI: 10.1080/2374068X.2020.1832414	16 Oct 2020
4	Manjunatha K N	High speed machining of titanium Ti6Al4V alloy components: Study and optimization of cutting parameters using RSM	Taylor and Francis Advances in Materials and Processing Technologies	DOI: 10.1080/2374068X.2020.1806684	18 Aug 2020
5	Dr. Thyagaraj N R	Optimized Design and Static Analysis of Robotic Arm End Effectors	Journal of Seybold Report	Vol.15, Issue 9, pp 4187-4198	2020
6	Dr. Chandramohan H K	Effect of Macroalloying Element Addition of Aluminum on pure copper	Metallography, Microstructure and Analysis, Springer	DOI: 10.1007/s13632-020-00644-3	Nov 2020
7	Dr Nataraja S N	Wear Characteristics Of Double Ceramic Particulate Hybrid Aluminium Matrix Composite	IOP Conf. Series: Materials Science and Engineering	1013 (2021) 012016	2020
8	Palakshaiah	Design and Development of Municipal Solid Waste Briquette Making Machine	IRJET	e-ISSN: 2395-0056, p-ISSN: 2395-0072	2020
9	Subbareddy D N	Tensile, Impact and Fracture Toughness Properties of Banana Fiber Reinforced Polymer Composites	Taylor and Francis Advances in Materials and Processing Technologies	DOI: 10.1080/2374068X.2020.1734350	21 Feb 2020

Year- 2019 [Scopus Indexed Journals]

Sl. No	Name of The Faculty	Description / Title of the Paper	Name of Journal	ISBN/ISSN	Date Of Publication
1	Babu E R, Nagaraj C Reddy, H N Reddappa, K V Shivanandha Murthy, G V Gnanendra Reddy, P G Koppad	Influence of Al2O3 Nanoparticles on Thermal performance of closed loop pulsating heat pipe	FME Transctions	Vol.48, No.1, 2020.145	July 2019
2	Thyagaraj N R, Aruna B N, T. Munikenchegowda, Ranganath R, Rukmangada P	Synthesis and Mechanical Characterization of Synthetic Bio Hybrid FRP Composites	International Journal of Recent Technology and Engineering (IJRTE)	2277-3878, Vol.8, ISSUE – IC	May 2019
3	Veeresh Chandra M S, Manjunath K N	Failure Index Determination of CFRP Composites while drilling (using different drill bit point angles) with FE Analysis	International Journal of Recent Technology and Engineering (IJRTE)	2277-3878, Vol.8, ISSUE – IC	May 2019
4	Madhusudhan S V, Gnanendra Reddy G V	Evolution of Microstructure and Mechanical Properties of AL-10 Wt. % Cu Alloy Processed through Centrifugal Casting at Different Rotational Speeds of the Die	International Journal of Recent Technology and Engineering (IJRTE)	2277-3878, Vol.8, ISSUE – IC	May 2019
5	Manu G	Optimization of System Utilization and Throughput in FMS Using Taguchi and ANOVA Approach	International Journal of Recent Technology and Engineering (IJRTE)	2277-3878, Vol.8, ISSUE – IC	May 2019

Scopus Indexed Journals – 2018

Year- 2017/2018 [Scopus Indexed Journals]

Scopus Indexed Journals – 2017

Sl. No	Name of The Faculty	Description / Title of the Paper	Name of Journal	ISBN/ISSN	Date Of Publication
1	Manjunath K N, GB Krishnappa (BGS R&D)	Mechanical characterization of Al-cu alloy produced using conventional sintering process	Elsevier Science Direct	2214-7853, Materials Today Proceedings	2018
2	Chandra Mohan H K, Gnanendra Reddy G V, Chowde Gowda M (BGS R&D)	Physical and Mechanical behaviour of Sida acuta Fibre Reinforced Epoxy Composite at different Fibre Loading	IITM-Springer	DOI: 10.1007/s12666-018-1343-7	2018
3	Thyagaraj N R, Ravi Kumar M, Subba Reddy D N (BGS R&D)	Strength Analysis of E-Glass and Jute Fiber Reinforced Polyester Composites	International Journal of Mechanical and Production Engineering Research & Development (IJMPERD)	ISSN (P): 2249-6890; ISSN (E): 2249-8001, Vol.8, ISSUE 2, 517-526	07/03/2018
4	Veeresh Chandra M S	Optimization of Machining Parameters in Drilling of GFRP (Glass/Vinyl Ester) Composites for Reduction of Delamination Factor	International Journal of Mechanical and Production Engineering Research & Development (IJMPERD)	ISSN (P): 2249-6890; ISSN (E): 2249-8001, Vol.8, ISSUE 2, 427-432	06/03/2018
5	Veeresh Chandra M S	Optimization of Process Parameters on Thrust Force and Delamination Factor in Drilling of Carbon Fiber Reinforced Composites	International Journal of Mechanical and Production Engineering Research & Development (IJMPERD)	ISSN (P): 2249-6890; ISSN (E): 2249-8001, Vol.8, ISSUE 2, 567-574	09/03/2018
6	Manu G	Flexible Manufacturing Systems (FMS): A Review	International Journal of Mechanical and Production Engineering Research & Development (IJMPERD)	ISSN (P): 2249-6890; ISSN (E): 2249-8001, Vol.8, ISSUE 2, 323-336	01/03/2018
7	Mallaradhya H M	Resistance Spot Welding: A Review	International Journal of Mechanical and Production Engineering Research & Development (IJMPERD)	ISSN (P): 2249-6890; ISSN (E): 2249-8001, Vol.8, ISSUE 2, 403-418

Sl. No	Name of The Faculty	Description / Title of the Paper	Name of Journal	ISBN/ISSN	Date Of Publication
1	Subba Reddy D. N et al.	Evaluation of Mechanical Properties in Banana Fibre Reinforced Polymer Composites	IRE Journal	ISSN: 2456-8880, Vol.1, Issue 3	2017
2	Veeresh Chandra M. S	Study on the Effects of Drill Parameters on the Quality of Drilled Hole in GFRP Composites	International Journal of Latest Technology in Engineering, Management & Applied Science (IJLTEMAS)	ISSN 2278-2540	2017
3	Dr. R. Ranganatha	Investigation on Mechanical Behaviour of Hybrid Jute/Sisal Fiber Reinforced Polyester Composites	International Journal of Scientific Research & Development	Vol.5, Issue 2, ISSN(online): 2321-0613	2017
4	Thyagaraj N R	Mechanical Characterization of Synthetic and Bio Fiber Reinforced Polyester Composites	International Advanced Research Journal in Science, Engineering and Technology REPSE – 17	ISSN(ONLINE) 2393-8021, ISSN(print) 2394-1588, Vol 4, Special Issue 7	2017
5	Veeresh Chandra M S	Statistical Optimization of Drilling Process Parameters on Quality of Hole of Glass FRP Composites	International Advanced Research Journal in Science, Engineering and Technology REPSE – 17	ISSN(ONLINE) 2393-8021, ISSN(print) 2394-1588, Vol 4, Special Issue 7	2017
6	Dr. T. Munikenchegowda	Finite Element Modeling and Vibration Control Study of Active Plate with Debonded Piezoelectric Actuators	Acta Mechanica	10.1007/s00707-014-1207-0	2017
7	Suma S	A Comparative Study to Measure the Effectiveness of Sexual Harassment Policies of IT & Non-IT Companies	National Journal on Women in Difficult Circumstances: Issues, Challenges & Responses	ISSN 2231 – 0096 (Special Issue), Vol.7, No.1 Part III	2017
8	Suma S	An Insight of “NCERT Policy for the Prevention, Prohibition and Punishment of Sexual Harassment of Women”	National Conference on “Human Rights: Trends, Issues & Challenges in the Present Scenario”	ISBN 978-81-933199-6-3	2017

Year- 2016 [Scopus Indexed Journals]

Scopus Indexed Journals – 2016

Sl. No	Name of The Faculty	Description / Title of the Paper	Name of Journal	ISBN/ISSN	Date Of Publication
1	Chandra Mohan H K, Gnanendra Reddy G V, Chowde Gowda M	Mechanical Properties of Untreated Sida Acuta Stem Fibre Fabric-Reinforced Epoxy Composites at Different Fibre Fabric Orientation	IITM – Springer	Volume 70, Issue 7, pp. 1933 – 1941	December 2016